Baku Model BK-938 220V is one of the best fast heating mini soldering station suitable for SMD / SMT Components Hand Soldering and Mobile Phone Repairing. It can reach a temperature of 450°C in less than one minute.

Baku Mini Soldering Station Features & Specification:

Model: BAKU BK-938

Operating Voltage: 220V

Type: Mini Soldering Station

Temperature Range: Max 450°C

Fast heating

How to Solder with Baku Mini Soldering Station – Step By Step Instruction

Make sure your Techtest Soldering Iron is hot. Don't touch it.

Hold the soldering iron properly in one hand and solder wire in the other hand. Maintain proper angle between the two. Try to use a solder wire reel stand.

Place the solder wire at the point where the lead of the electronic components meets the copper track on the PCB.

Apply heat at the point where solder wire touches the lead of the component.

Once solder wire melts and soldering is done, remove the soldering iron.

Allow a few seconds to cool.

Cut extra leads of the electronic components.

NOTE: A good solder joint should look shiny. Dull joint suggests something is wrong. If you are doing lead-free soldering, the joint will look dull in any case.